Troubleshooting High Baghouse Differential Pressure
When baghouse differential pressure (ΔP) rises, find the cause before replacing filter bags: check the measurement first, then gas flow, cleaning, condensation, dust and, last, the bags themselves. Work through the steps below and check off each item.
Which Differential Pressure Value Should You Watch?
The trend of ΔP right after cleaning (residual ΔP) matters more than any single reading. ΔP drops after each cleaning and then climbs again; if the post-cleaning value keeps rising over weeks or months, the bag surface or the felt is gradually blinding.
Can the Filter Bag Itself Limit ΔP Rise?
Conventional filter bags, where dust penetrates and builds up inside the felt, tend to show rising residual ΔP over their service life. ePTFE membrane filter bags (DuraFill™) capture dust at the surface, so dust does not embed in the felt; they tend to clean well and keep ΔP low and stable. The principle is explained in Depth Filtration vs. Surface Filtration.
Frequently Asked Questions
What should I check first when ΔP rises suddenly?
A sudden rise usually points to a change in operating conditions, such as condensation, a cleaning system failure or a surge in gas flow. A gradual rise usually means the bag surface is slowly blinding.
Is a sudden drop in ΔP also a problem?
Yes. A sudden drop in ΔP can mean a torn or dislodged bag that lets gas bypass. Check it together with stack emissions.
What does high ΔP cost?
The fan uses more power, and more frequent cleaning increases compressed air use and bag wear. The system may also lose airflow capacity, which can affect the process.
Your results or checked items are added to the inquiry note automatically. Add your company and email, and our engineer will reply with a filter proposal.
Data collected: company name and email (plus any contact details you add) · Purpose: to review and respond to your inquiry · Retention: 5 years as an inquiry record, then deleted
✓
Thank you. We have received your request.
Head Office
Micro-one Co., Ltd. (head office and factory)
368 Yeongok-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do 31026, Republic of Korea Tel: +82-41-587-6911Fax: +82-41-587-6922Email: info@micro-one.kr
Dangjin Plant 2
1307 Tongjeong-ri, Seongmun-myeon, Dangjin-si, Chungcheongnam-do, Korea
Seoul Office
165 Gasan Digital 1-ro, Geumcheon-gu, Seoul (371-6, Gasan-dong)