A catalytic filter bag filters dust inside the baghouse while its catalyst converts NOx to nitrogen and water, so temperature and reagent control are added to the usual baghouse checks. Work through the items below and check off each one.
Under What Conditions Are Catalytic Filter Bags Used?
CataFill™ is a catalytic filter bag made by laminating an ePTFE membrane onto a catalyst-loaded PTFE needle felt, and it reduces dust and NOx together inside an existing baghouse. Its performance is certified under Korea New Environmental Technology (NET) No. 631: dust removal of 99% or more, NOx reduction of about 50%, and differential pressure of 100 mmH₂O or less. Depending on site conditions, NOx reduction of 80% or more is achievable at operating temperatures of 180°C and above. In 2024, Micro-one supplied 3,300 bags to the Kanding (崁頂) incinerator in Taiwan.
Can Gases Other Than NOx Be Reduced?
The target gas depends on the catalyst loaded. Two versions are supplied commercially: NOx (DeNOx) and HCN (DeHCN). In 2026, 840 CataFill™-DHX bags were supplied to a major refinery and petrochemical plant in Korea, cutting HCN emissions by more than 90%. Other gases such as CO can be addressed with a custom design after reviewing the target substance and operating conditions.
Frequently Asked Questions
Do I need a new baghouse to use catalytic filter bags?
No. By replacing the filter bags in an existing baghouse with catalytic filter bags and adding a reagent supply system, the same baghouse can also reduce NOx. Operating temperature and housing conditions need to be reviewed.
Can catalytic filter bags be used below 180°C?
CataFill™ can be applied at 120–200°C flue gas, but NOx reduction efficiency varies with temperature. 180°C or higher is recommended for NOx reduction.
What is ammonia slip?
Ammonia slip is ammonia that does not take part in the DeNOx reaction and leaves with the flue gas. It increases when too much reagent is injected or mixing is uneven, so outlet ammonia should be monitored as well.
Your results or checked items are added to the inquiry note automatically. Add your company and email, and our engineer will reply with a filter proposal.
Data collected: company name and email (plus any contact details you add) · Purpose: to review and respond to your inquiry · Retention: 5 years as an inquiry record, then deleted
✓
Thank you. We have received your request.
Head Office
Micro-one Co., Ltd. (head office and factory)
368 Yeongok-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do 31026, Republic of Korea Tel: +82-41-587-6911Fax: +82-41-587-6922Email: info@micro-one.kr
Dangjin Plant 2
1307 Tongjeong-ri, Seongmun-myeon, Dangjin-si, Chungcheongnam-do, Korea
Seoul Office
165 Gasan Digital 1-ro, Geumcheon-gu, Seoul (371-6, Gasan-dong)