Air-to-cloth ratios by dust type are experience-based values from baghouses handling similar dusts, used as a starting point when sizing the cloth area of a new baghouse. The table below lists the values the U.S. EPA Cost Manual gives as “generally safe design values”; actual application also requires consideration of particle size and dust loading.
Dust
Shaker / Reverse-Air, Woven (m/min)
Pulse-Jet / Reverse-Air, Felt (m/min)
ft/min (Woven / Felt)
Alumina
0.76
2.44
2.5 / 8.0
Asbestos
0.91
3.05
3.0 / 10.0
Bauxite
0.76
2.44
2.5 / 8.0
Carbon Black
0.46
1.52
1.5 / 5.0
Coal
0.76
2.44
2.5 / 8.0
Cocoa, Chocolate
0.85
3.66
2.8 / 12.0
Clay
0.76
2.74
2.5 / 9.0
Cement
0.61
2.44
2.0 / 8.0
Cosmetics
0.46
3.05
1.5 / 10.0
Enamel Frit
0.76
2.74
2.5 / 9.0
Feeds, Grain
1.07
4.27
3.5 / 14.0
Feldspar
0.67
2.74
2.2 / 9.0
Fertilizer
0.91
2.44
3.0 / 8.0
Flour
0.91
3.66
3.0 / 12.0
Fly Ash
0.76
1.52
2.5 / 5.0
Graphite
0.61
1.52
2.0 / 5.0
Gypsum
0.61
3.05
2.0 / 10.0
Iron Ore
0.91
3.35
3.0 / 11.0
Iron Oxide
0.76
2.13
2.5 / 7.0
Iron Sulfate
0.61
1.83
2.0 / 6.0
Lead Oxide
0.61
1.83
2.0 / 6.0
Leather Dust
1.07
3.66
3.5 / 12.0
Lime
0.76
3.05
2.5 / 10.0
Limestone
0.82
2.44
2.7 / 8.0
Mica
0.82
2.74
2.7 / 9.0
Paint Pigments
0.76
2.13
2.5 / 7.0
Paper
1.07
3.05
3.5 / 10.0
Plastics
0.76
2.13
2.5 / 7.0
Quartz
0.85
2.74
2.8 / 9.0
Rock Dust
0.91
2.74
3.0 / 9.0
Sand
0.76
3.05
2.5 / 10.0
Sawdust (Wood)
1.07
3.66
3.5 / 12.0
Silica
0.76
2.13
2.5 / 7.0
Slate
1.07
3.66
3.5 / 12.0
Soap, Detergents
0.61
1.52
2.0 / 5.0
Spices
0.82
3.05
2.7 / 10.0
Starch
0.91
2.44
3.0 / 8.0
Sugar
0.61
3.96
2.0 / 13.0
Talc
0.76
1.52
2.5 / 5.0
Tobacco
1.07
—
3.5 / —
Zinc Oxide
0.61
—
2.0 / —
No matching dust in the table.
How Should These Values Be Used?
They are net A/C ratios. They are based on the cloth area remaining after offline compartments are subtracted. Compare them with the net value from the air-to-cloth ratio calculator.
Use the woven or felt column as appropriate. Shaker and reverse-air baghouses use woven filter bags; pulse-jet baghouses use felt (nonwoven) filter bags.
Use them only as a starting point. The EPA notes that particle size and dust loading must also be considered. For fine dust, high inlet loading, or hygroscopic or sticky dust, consider lower values.
Why Are Incinerator Flue Gas Values Not in the Table?
The source table has no entry for waste incineration flue gas. Incinerator baghouses also receive sorbents such as hydrated lime and activated carbon, and acid gas and moisture conditions vary from plant to plant, so the A/C ratio is set from operating data of similar plants together with the filter conditions. If needed, send us your conditions below for a review.
Frequently Asked Questions
How do I convert m/min to ft/min?
1 m/min is about 3.281 ft/min. The m/min values in the table are the source ft/min values divided by 3.281.
Why are pulse-jet values higher than woven values?
Pulse-jet baghouses use felt filter bags and are cleaned frequently with short bursts of compressed air while on line, so they are often designed at a higher A/C ratio for the same dust.
Can membrane filter bags be designed at a higher A/C ratio?
Membrane filter bags help keep differential pressure low through surface filtration, but the design A/C ratio should be set from dust conditions and operating experience. It is safer to confirm with the differential pressure trend than to simply raise the table values.
U.S. EPA, Air Pollution Control Cost Manual, Section 6, Chapter 1, “Baghouses and Filters,” Table 1.1, Gas-to-Cloth Ratios for Baghouse/Fabric Combinations Source
Your results or checked items are added to the inquiry note automatically. Add your company and email, and our engineer will reply with a filter proposal.
Data collected: company name and email (plus any contact details you add) · Purpose: to review and respond to your inquiry · Retention: 5 years as an inquiry record, then deleted
✓
Thank you. We have received your request.
Head Office
Micro-one Co., Ltd. (head office and factory)
368 Yeongok-gil, Ipjang-myeon, Seobuk-gu, Cheonan-si, Chungcheongnam-do 31026, Republic of Korea Tel: +82-41-587-6911Fax: +82-41-587-6922Email: info@micro-one.kr
Dangjin Plant 2
1307 Tongjeong-ri, Seongmun-myeon, Dangjin-si, Chungcheongnam-do, Korea
Seoul Office
165 Gasan Digital 1-ro, Geumcheon-gu, Seoul (371-6, Gasan-dong)